CUSTOM SHAPED DUST SHIELD. If you have a special design of headset dust shield that you need, I can probably produce it for you. If I get enough requests, or if I think your specially shaped dust shield will be a good selling item, I will absorb all the costs of producing the molds and related tooling and charge only shipping. Just send me an email with your request.
The Lowest Stack Height integrated headset dust shield in the world adds only .7 mm to your stack height.
The lightest in the world at 1 gram for the Dust Shield itself.
All models come in two types... Plain Weave or Unidirectional carbon fiber.
All Veloflyte Dust Shields are meant for 1 1/8" threadless steerer tubes.
The Standard Dust Shield comes with two .5mm micro spacers. These may be necessary to tune the height of the dust shield to your own bicycles specific needs.
The Veloflyte Dust Shield comes in a standard model designed to fit many different road bikes and in very specific models designed to fit specific bicycles. Be sure to scroll down the entire page to see them all. Currently there are specific models for :
<> Specialized Tarmac
<> Specialized Shiv
<> Parlee Z5
<> Cannondale Super six
<> Cannondale CAAD 10
<> Cervelo S5
<> Ritchey semi-integrated headset
Perfectly shaped Carbon Dust Shield to fit the Cannondale CAAD 10 road frameset. Available in Plain Weave (pictured) or Unidirectional (below) carbon. With a stack height of less than .7mm and a weight of 1.2 grams. There is nothing better.
This is the Unidirectional version of the CAAD 10 dust shield manufactured by me in California at my workshop.
Below you can see pictures of this dust shield installed on a customers SHIV.
Here is another custom carbon dust shield. This particular shield is designed to be a perfect fit on the Cervelo S5 road bike. Available in either Plain Weave or Unidirectional carbon. And only .7mm tall weighing less than 1 gram.Please specify when ordering whether you want the Plain Weave (top picture) or Unidirectional (bottom picture)
Eric T. was the first cyclist to ask for a carbon fiber dust shield specifically made for his new Cervelo S5. Here are some pictures he sent me of the finished unit installed on his Cervelo. You will not find any other dust shield that is lower in stack height, lighter in weight, or nicer looking.
A special request from a customer with a Parlee Z5 which has a thin head tube with a diameter of 44mm. This is the same as the standard dust shield at the top of the page, only in a smaller diameter.
Here is yet another custom Dust Shield created by request. This 50mm diameter fits the Ritchey WCS semi integrated headsets. The customer that asked for it has a Scott brand of Mountain Bike that use the Ritchey semi-integrated headsets.